Aluminium Box Split TV Unit

For your box split tv unit, for this box split tv unit, measure the full living-room wall and your actual television before approving any cabinet dimensions.

Record the screen width, height and mount, the viewing distance from the sofa and the position of switches, sockets and nearby doors. Check skirting, beams and floor levels. Leave access to the television connectors rather than enclosing them behind an inaccessible panel.

The concept does not establish manufactured dimensions. Use the design ID to request an elevation for your own room. A measured drawing should show each cabinet width, the usable shelf depth and the clear space around the screen.

Review the wall with furniture in its normal position so that the unit remains comfortable to use.

In this box split tv unit concept, the visible model uses wide low solid-door media box with a plain rectangular full-height TV backing; two long drawers above three closed lower compartments, a left horizontal glass display box and a right square cupboard.

Decide which compartments should hold everyday remotes, documents and media equipment, and which sections are for display. Measure any set-top box, router, console or speakers you plan to retain. Allow practical access when a drawer or shutter is open.

Equipment compartments need a ventilation and cable route suited to the actual devices; a concept image cannot confirm those requirements. Keep heavy items within the agreed cabinet specification. Discuss the balance of open and closed storage before fixing the elevation.

A full wall backpanel can visually connect separate boxes, but its fixing and access points still need a measured construction drawing.

When specifying this box split tv unit, this design is assigned an Aluminium cabinet system. The image is a visual concept and does not verify hidden construction. Specify the metal grade, thickness, frame, shutter build and edge treatment with the TV unit service.

Keep all fabrication edges straight and square. A laminate appearance describes the visible finish; it does not change the specified metal body into a wooden cabinet. GI is suitable here only for dry indoor storage and is not recommended for counters or water-use areas.

Record the proposed fabrication details in the quotation and approve physical finish samples. For built-up shutters, review the shutter construction guide with the designer.

For the box split tv unit finish, the finish direction is sage PU matte and ash laminate. Compare a physical laminate or coating sample under your living-room daylight and evening lighting. Confirm the colour, sheen, texture and grain direction across adjacent doors and backpanel sections.

Digital colour is a reference and can differ from the installed material. Where the concept includes glass, agree whether the final shutter should use black tinted, white frosted or fluted glass and specify its frame and thickness.

Check how much stored equipment remains visible through the chosen glass. Do not infer a catalogue code from appearance alone. The exact approved manufacturer reference and edge detail should appear in the final schedule.

For this box split tv unit layout, this concept follows a grounded arrangement. Grounded boxes require a planned closed plinth and checks for floor levels, skirting and cleaning access.

Floating cabinets require wall assessment, a fixing design and the correct support for the approved cabinet and contents. Combined models need both checks, with the spacing between elements shown on the elevation. Confirm that the wall can accommodate the proposed TV mount and cabinetry.

A photograph does not establish a load capacity or structural fixing method. Keep cable access and ventilation reachable after installation. Review the movement of nearby doors and curtains before approving long horizontal cabinets or vertical display stacks.

For your box split tv unit accessories, Hettich is specified for accessories. Choose compatible hinges, drawer runners and storage fittings for the approved metal cabinet and shutter system. Record exact models and quantities in the itemised quotation, including any optional organisers.

The concept does not identify a particular accessory series or tested load rating. Check full drawer extension against the sofa, coffee table and room circulation. Specify the practical opening required behind each shutter.

Ask the designer to coordinate fittings with glass frames where glass doors are included. Optional lighting should have its own electrical and fitting schedule. Confirm access for future adjustments rather than concealing all service points permanently behind the backpanel.

To customise this box split tv unit, share MM-TV003 with photographs of your room, the TV model and your storage priorities on the design consultation page.

Request an itemised schedule for cabinet modules, the Aluminium system, backpanel, shutters, approved finish, Hettich fittings, installation and site preparation. Prices and timelines depend on the agreed measured scope. This concept does not carry a fixed price, delivery date or warranty promise.

Review the written project terms before placing an order. For a wider kitchen project, the kitchen estimator and 3D Finish Studio are separate kitchen tools; they do not configure or quote this TV unit.

at handover, compare the unit with the approved elevation and material schedule. Check cabinet levels, the grounded plinth or floating supports, drawer movement, shutter alignment, glass seating and cable access. Confirm that the television and equipment can be connected and serviced without dismantling unrelated cabinets.

Retain the approved laminate or coating sample and Hettich model references for maintenance. Follow the care instructions for the actual installed materials. Keep storage dry, wipe spills promptly and avoid abrasive pads or unsupported cleaners on the finish and glass.

Discuss any adjustment using the instructions for the selected fittings. The approved construction schedule remains the reference for the installed unit.

For your box split tv unit, make a device list before setting the compartment sizes. Include the television, set-top box, router, games console, amplifier, speakers and any charging dock you want to retain. Measure the device itself and the space needed behind it for connectors. Check the manufacturer’s ventilation instructions for each powered device.

Plan sockets and cable openings on the measured elevation. Separate the route to the TV from the route to the equipment cupboard where practical. Discuss which connections need regular access, such as a USB port or a games controller cable. A removable access detail can be useful, but its position and construction must be agreed on the drawing.

The box split tv unit arrangement shows wide low solid-door media box with a plain rectangular full-height TV backing; two long drawers above three closed lower compartments, a left horizontal glass display box and a right square cupboard. Mark the intended purpose of each closed box, open niche and display section. This avoids allocating a visually attractive compartment to a device that does not fit. Review the shelf position and clear opening with the shutter open. Allow for the actual connector projection rather than only the catalogue device depth.

Check the viewing position from the sofa you actually use. Review the TV height and distance with your preferred screen size before fixing the backpanel elevation. Consider reflections from windows and room lights when choosing the final screen position. Keep the cabinet arrangement coordinated with curtains, door swings, the coffee table and the route through the room.

For the box split tv unit backpanel, show panel joints and access points on the elevation. Review the grain or texture direction with the physical finish sample. Where the concept includes several separate boxes, show their spacing and alignment using measured dimensions. Keep the square edges and rectangular cabinet volumes consistent with the approved metal fabrication detail.

Discuss installation access before confirming a large wall arrangement. Check the route into the room, the wall condition and the space needed to assemble or fix the cabinet modules. Any electrical preparation should be identified separately in the scope. The cabinet image is not an electrical plan, a structural fixing detail or evidence of an included lighting package.

Use a final box split tv unit checklist to record cabinet dimensions, material grade, shutter build, glass specification, approved laminate or coating reference and Hettich accessory models. Add equipment ventilation, cable access, wall support and site preparation to that schedule. Confirm optional display lighting separately. Keep the approved drawing and itemised quotation together so that the visible arrangement and the hidden construction are reviewed as one measured design.

Before approving your box split tv unit, list the objects you want to display as well as the equipment you need to store. Measure tall vases, framed photographs and books instead of assigning display shelf heights from the image alone. Decide which objects need a glass-front section and which should remain in closed storage.

Review glass visibility under the lighting in your own room. A tinted shutter can look different when the cupboard behind it is dark. Frosted or fluted glass also changes how stored objects are seen. Ask to compare the proposed glass sample beside the chosen cabinet finish before confirming the elevation.

For the box split tv unit, mark the handle position and opening direction on each door. Review access from the sofa and check whether a vertical box sits beside a walkway. Think through everyday tasks such as changing an equipment connection, taking out a book or retrieving a remote, with the coffee table in place.

If you want display lighting, discuss the purpose of each light rather than copying every glow in the concept image. Confirm which shelves should be illuminated, how the fittings are accessed and where wiring should run. Electrical preparation and lighting supply belong in a separately identified part of the measured scope.

Check the finish transitions around the box split tv unit backpanel and storage boxes. A woodgrain surface, solid-colour shutter and glass frame can meet at several visible edges. Approve the grain direction, edge detail and the way adjoining panels line up. Keep those junctions straight and square for the metal construction.

Discuss maintenance access for the actual arrangement. Identify how to reach the floor below a floating unit and the edges around a grounded plinth. Allow access behind equipment for cleaning and cable changes. Review how a glass shelf or shutter can be maintained using the care instructions for its specified material.

Consider household access needs before fixing shelf positions. Frequently used items should be reachable for the people who will use the cabinet. Review low storage, high display areas and drawer openings with your room circulation. Ask the designer to show the usable space and opening clearances on the measured drawing.

Your box split tv unit is a starting direction for a measured cabinet schedule. Approve the exact metal construction, selected finish samples, glass, backpanel build and accessories together. A change to the number of drawers or the width of a display section should be reflected in both the drawing and itemised quotation.

Before final approval, compare the drawing with your equipment list and room photographs. Check the TV position, storage map, cable route, support details and optional lighting scope. Record any unresolved sample or site-preparation item before fabrication. Keep the design ID with the approved documents so that the chosen concept and its final room-specific specification remain connected.

Create a module-by-module schedule for the box split tv unit rather than relying on a single overall wall dimension. Give each cabinet a position on the elevation and record its external width, height and depth. Include the intended internal use so that shelves, drawers and equipment niches can be checked against actual objects.

Where neighbouring boxes use different depths, show that relationship on a side view. Review how the backpanel meets each box and how exposed edges will be finished. A straight-on concept can hide these depth differences. Ask for the construction detail at any junction that affects fixing, opening clearance or future access.

For your box split tv unit, distinguish the visible finish from the body specification. The schedule should identify the metal system, agreed grade and thickness, shutter construction, coating or laminate reference and edge detail. A material name in the concept title is the assigned design direction; the final approved schedule defines the installed construction.

List drawer fronts and usable drawer storage separately where necessary. Review the space taken by the agreed runners and cabinet construction with the designer. Check the intended storage against the usable drawer dimensions before choosing organisers. Hettich accessory models and quantities should match the approved drawer and shutter arrangement in the itemised quotation.

Glass-front storage needs its own schedule. Identify each glass shutter, its frame, the approved glass direction and the agreed opening mechanism. Confirm which shelves are for display and which are intended for everyday items. Review reflections and visibility using samples. Record any optional lighting without assuming it is included because the image shows illumination.

Review the box split tv unit installation sequence with the measured drawing. Identify the TV mounting, panel fixing, cabinet support, cable access and any site preparation that needs to happen first. Keep responsibility for electrical work and other preparation clear in the agreed scope. The concept alone is not an installation instruction or a structural specification.

Before installation, compare the prepared room with the dimensions used for approval. Discuss any changed socket position, altered skirting, wall treatment or furniture arrangement. A late change can affect a cable opening or shutter clearance. Update the relevant drawing and scope rather than leaving an important difference to be resolved from the concept photograph.

At the final box split tv unit review, open every drawer and shutter in the agreed room arrangement. Check access to the equipment, the backpanel service points and the planned storage sections. Compare visible finish transitions with the approved sample direction. Record any adjustment needed and keep the material and accessory references with the handover documents.

Keep the quotation and approved elevation as a connected record. If a module, finish, glass type or accessory changes, revise the affected part of the schedule. This makes it easier to compare the chosen design with the agreed measured version. It also gives future maintenance a clear reference without inferring hidden construction from the AI-generated image.